Scientific Library of Tomsk State University

   E-catalog        

Normal view MARC view

Method for radiation center position measurements of a combined antenna in the pulsed mode Y. A. Andreev, V. N. Kornienko, S. Liu

By: Andreev, Yury AContributor(s): Kornienko, Vladimir N | Liu, ShuhuaMaterial type: ArticleArticleSubject(s): сверхширокополосные антенны | приемные антенны | вращение антенныGenre/Form: статьи в журналах Online resources: Click here to access online In: IEEE Transactions on antennas and propagation Vol. 66, № 8. P. 4269-4276Abstract: This paper proposes a method for measuring the position of radiation centers for an ultra-wideband combined antenna (CA) in the pulsed mode. The radiation centers for E- and H-planes of the antenna are determined. Antenna rotation in these planes, with respect to an arbitrary axis, results in the time delays (advances) of the recorded receiving pulses for various angles. The purpose of the measurements is to find the rotation axes providing minimum time delays of the radiated pulse registration at the receiving antenna for the largest possible range of observation angles. These rotation axes pass through local areas (radiation centers) in the antenna volume. Simple analytic formulas refining the position of the radiation center from an arbitrary measurement are proposed. In the simulations, a code based on the FDTD method was used. The CA has at least two radiation centers. Radiation center of the H-plane is located at 1/3-1/2 of the antenna length counting from its rear wall, slightly below the antenna's half height. Radiation center of the E-plane is located near the aperture plane of the antenna, also slightly below the antenna's half height.
Tags from this library: No tags from this library for this title. Log in to add tags.
No physical items for this record

Библиогр.: 25 назв.

This paper proposes a method for measuring the position of radiation centers for an ultra-wideband combined antenna (CA) in the pulsed mode. The radiation centers for E- and H-planes of the antenna are determined. Antenna rotation in these planes, with respect to an arbitrary axis, results in the time delays (advances) of the recorded receiving pulses for various angles. The purpose of the measurements is to find the rotation axes providing minimum time delays of the radiated pulse registration at the receiving antenna for the largest possible range of observation angles. These rotation axes pass through local areas (radiation centers) in the antenna volume. Simple analytic formulas refining the position of the radiation center from an arbitrary measurement are proposed. In the simulations, a code based on the FDTD method was used. The CA has at least two radiation centers. Radiation center of the H-plane is located at 1/3-1/2 of the antenna length counting from its rear wall, slightly below the antenna's half height. Radiation center of the E-plane is located near the aperture plane of the antenna, also slightly below the antenna's half height.

There are no comments on this title.

to post a comment.
Share